Aerospace

To help reduce air and noise pollution and to lower costs, manufacturers are looking to reduce the weight of aircraft.

Iron Cobalt alloys help reduce both space and weight by offering powerful solutions for sensors, generators and motors. Indirectly, INVAR plates reduce weight through the manufacturing of moulds for lighter weight composite parts. Today, more than 80% of an aircraft's structural parts are made of carbon composites.

Thumbnail
Actuators and Transformers
  • Iron Cobalt are key materials to answering the requirement to eliminate superfluous weight and volumes. Superalloys are key materials for their excellent mechanical strength and temperature resistance.
Manufacturing Entity
Trademark
Family
Properties
Standards
Forms
Chemical Composition
Pdf
ImphyIMPHY AFK 1Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801, A801-2Strips, Wire rods, Plates, Bars, Cold drawn barsFe Co 27
ComponentsIMPHY AFK 1Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801, A801-2PartsFe Co 27
ImphyIMPHY AFK 18Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801Strips, Wire rods, Plates, Bars, Cold drawn barsFe Co 18
ComponentsIMPHY AFK 18Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801PartsFe Co 18
RescalIMPHY AFK 18Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801Drawn wireFe Co 18
ImphyIMPHY AFK 502Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801Strips, Wire rods, BarsFe Co 49
ComponentsIMPHY AFK 502Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801PartsFe Co 49
ImphyIMPHY AFK 502 FPMagnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801StripsFe Co 49 V2
ComponentsIMPHY AFK 502 FPMagnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801PartsFe Co 49 V2
ImphyIMPHY AFK 502  RMagnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801 StripsFe Co 49 V2
ImphyPERMIMPHYMagnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA 753, N14080Strips, Wire rods, Bars, Cold drawn barsNi 80 Fe Mo 5
ComponentsPERMIMPHYMagnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA 753, N14080PartsNi 80 Fe Mo 5
Defence Equipment
  • Alloys are used for the manufacturing of very accurate telescope and optical systems for specific satellites. Due to a thermal expansion that is very close to that offered by carbon composites, INVAR is also used in the junction rings situated between a missile's propulsion and active sections.
Manufacturing Entity
Trademark
Family
Properties
Standards
Forms
Chemical composition
Pdf
ImphyINVAR

Controlled Expansion Alloys

Very low expansion coefficient1.3912, K93600, K93603Strips, Wire rod, Plates, BarsFe Ni 36
RescalINVAR

Controlled Expansion Alloys

Very low expansion coefficient1.3912, K93600, K93603Drawn wireFe Ni 36
ImphyIMPHY AFK 1

Magnetic Alloys

Soft Co-Fe magnetic alloys with very high saturation inductionA801, A801-2Strips, Wire rod, Plates, Bars, Cold drawn barsFe Co 27
ComponentsIMPHY AFK 1

Magnetic Alloys

Soft Co-Fe magnetic alloys with very high saturation inductionA801, A801-2PartsFe Co 27

Imphy

IMPHY 617Corrosion ResistanceCorrosion and oxidation resistant Alloys2.4663, N0617Wire rod, Bars, Cold drawn barsNi Cr 22 Co 11 Mo 9 Fe 1 Al 1 

imphy

IMPHY 718Corrosion ResistanceCorrosion and oxidation resistant Alloys2.4668, N07718Wire rod, Bars, Cold drawn barsNi Fe 18,5 Cr 18 Nb 5 Mo 3 Ti 1 
ImphyIMPHY 750

Corrosion Resistance

Corrosion and oxidation resistant Alloys2.4669, N07750Wire rod, Bars, Cold drawn barsNi C r15 Fe7 Ti 2,5 Nb 1 Al 0,7
ImphyIMPHY 80A

Corrosion Resistance

Corrosion and oxidation resistant Alloys2.4631, 2.4952, N07080Strip, Wire rod, Bars, Cold drawn barsNi Cr 20 Ti 2 Al 1,5
ImphyIMPHY 90

Corrosion Resistance

Corrosion and oxidation resistant Alloys2.4632, 2.4969, N07090Wire rod, Bars, Cold drawn barsNi 60 Cr 20 Co 16 Ti 2,5 Al 1,5
ImphyDURIMPHY

Maraging

High Yield Strength 2.4663, N0617Strips, BarsNi 18 Co 9 Mo 5 Ti
ImphyMARPHY 17

Maraging

High Yield Strength1.6359,K92890Bars, Cold drawn barsFe Ni18 Co8 Mo5 Ti0,4 Al
ImphyMARPHY 23

Maraging

High Yield Strength 1.6356, K93540Bars, Cold drawn barsFe Ni18Co12 Mo4 Ti1.5 Al
ImphyPHYNOX

Maraging

High Yield StrengthF1058,  , R30003, R30008Strips, Wire rod, Cold drawn bars, Drawn wireCo 40 Cr 20 Ni 16 Fe 15 Mo 7 Mn
ImphyIMPHY N99

Special Alloys

Welding Alloys2.4066, N02200Wire rodNi 99,2
Engines and Turbines
  • Iron Cobalt are key materials to answering the requirement to eliminate superfluous weight in turbines and engines. Superalloys are key materials for their excellent mechanical strength and temperature resistance.
Manufacturing Entity
Trademark
Family
Properties
Standards
Forms
Chemical composition
Pdf
ImphyIMPHY AFK 1Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801, A801-2Strips, Wire rod, Plates, BarsFe Co 27 
ComponentsIMPHY AFK 1Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801, A801-2PartsFe Co 27
ImphyIMPHY AFK 18Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801Strips, Wire rod, Plates, Bars, Cold drawn barsFe Co 18
ComponentsIMPHY AFK 18Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801PartsFe Co 18
RescalIMPHY AFK 18Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801Drawn wireFe Co 18
ImphyIMPHY AFK 502Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801Strips, Wire rod, BarsFe Co 49
ComponentsIMPHY AFK 502Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801PartsFe Co 49
ImphyIMPHY AFK 502  FPMagnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801StripsFe Co 49 V2
ComponentsIMPHY AFK 502 FPMagnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801PartsFe Co 49 V2

Imphy

IMPHY 25 CoCorrosion ResistanceCorrosion and oxidation resistant Alloys2.4964, R30605Wire rodCo Cr 20 W 15 Ni 10 Fe 3 Mn 1

Imphy

IMPHY 617Corrosion ResistanceCorrosion and oxidation resistant Alloys2.4663, N0617Wire rodNi Cr 22 Co 11 Mo 9 Fe 1 Al 1
Imphy

IMPHY 706

Corrosion ResistanceCorrosion and oxidation resistant AlloysN09706Wire rod, Cold drawn barsNi Fe 37 Cr 16 Nb 3 Ti 2
ImphyIMPHY 718Corrosion ResistanceCorrosion and oxidation resistant Alloys2.4668, N07718Strip, Wire rods, Bars, Cold drawn barsNi Fe 18,5 Cr 18 Nb 5 Mo 3 Ti 1
Imphy

IMPHY 750

Corrosion ResistanceCorrosion and oxidation resistant Alloys2.4669, N07750Wire rods, Bars, Cold drawn barsNi C r15 Fe7 Ti 2,5 Nb 1 Al 0,7
Imphy

IMPHY 80A

Corrosion ResistanceCorrosion and oxidation resistant Alloys2.4631, 2.4952, N07080Strip, Wire rod, Bars, Cold drawn barsNi Cr 20 Ti 2 Al 1,5
Imphy

IMPHY 90

Corrosion ResistanceCorrosion and oxidation resistant Alloys2.4632, 2.4969, N07090Wire rod, Bars, Cold drawn barsNi 60 Cr 20 Co 16 Ti 2,5 Al 1,5
Imphy

IMPHY 82

Special AlloysWelding Alloys2.4806, N06082Wire rodNi Cr 20 Mn 3 Nb 3
 

IMPHY NCW

Special AlloysWelding Alloys2.4665, N06002Wire rodNi Cr 22 Fe 18 Mo 9 Co 1,5 W
Imphy

IMPHY X

Special AlloysWelding Alloys2.4665, N06002Wire rodNi Cr 22 Fe 18 Mo 9 Co 1,5 W

 

Fasteners
  • Superalloys grades are available when high strength, high temperature and close tolerance applications are required.
Manufacturing Entity
Trademark
Family
Properties
Standards
Forms
Chemical composition
Pdf
ImphyIMPHY 286

Corrosion Resistance

Corrosion and oxidation resistant Alloys1.4944 , 1.4980, S66286Wire rod, Bars, Cold drawn barsFe Ni 26 Cr 15 Ti 2 Mo 1 Al V B
Imphy

IMPHY 706

Corrosion ResistanceCorrosion and oxidation resistant AlloysN09706Wire rod, Cold drawn barsNi Fe 37 Cr 16 Nb 3 Ti 2
Imphy

IMPHY 750

Corrosion ResistanceCorrosion and oxidation resistant Alloys2.4669, N07750Wire rod, Bars, Cold drawn barsNi C r15 Fe7 Ti 2,5 Nb 1 Al 0,7
Imphy

IMPHY NiCu32

Corrosion ResistanceCorrosion and oxidation resistant Alloys2.4360, N04400Wire rod, Bars,Ni Cu 32 Fe 1,6 Mn 1
Imphy

IMPHY NiCu28Al

Corrosion ResistanceCorrosion and oxidation resistant AlloysB865, 2,4376, N05500Wire, Rod, BarsNi Cu 30 Al
Imphy

MARPHY 17

MaragingHigh Yield Strength1.6359,K92890Bars, Cold drawn barsFe Ni18 Co8 Mo5 Ti0,4 Al
Imphy

MARPHY 23

MaragingHigh Yield Strength 1.6356, K93540Bars, Cold drawn barsFe Ni18Co12 Mo4 Ti1.5 Al
Generators and Motors
  • Iron Cobalt are key materials to answering the requirement to eliminate superfluous weight and volumes. Superalloys are key materials for their excellent mechanical strength and temperature resistance.
Manufacturing Entity
Trademark
Family
Properties
Standards
Forms
Chemical composition
Pdf
Imphy

IMPHY AFK 1

Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801, A801-2,Strips, Wire rod, Plates, Bars, Cold drawn barsFe Co 27
Components

IMPHY AFK 1

Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801, A801-2,PartsFe Co 27
Imphy

IMPHY AFK 18

Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801Strips, Wire rods, Plates, Bars, Cold drawn barsFe Co 18
Components

IMPHY AFK 18

Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801PartsFe Co 18
Rescal

IMPHY AFK 18

Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801Drawn wireFe Co 18
IMPHY 

IMPHY AFK 502

Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801StripsFe Co 49 V2
IMPHY 

IMPHY AFK 502 FP

Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA801StripsFe Co 49 V2
Landing Gears
  • Iron Cobalt alloys contribute to such critical sub-systems as landing gears. The challenge is to ensure safe and robust devices that also meet weight and cost efficiency requirements.

Manufacturing Entity
Trademark
Family
Properties
Standards
Forms
Chemical composition
Pdf
Imphy

MARPHY 17

MaragingHigh Yield Strength 1.6359,K92890Bars, Cold drawn barsFe Ni18 Co8 Mo5 Ti0,4 Al
Imphy

IMPHY SUPRA 50

Magnetic AlloysSoft Co-Fe magnetic alloys with very high saturation inductionA 753, 17405Bars, Cold drawn barsFe Ni 48
Moulds
  • The low thermal expansion of INVAR® and its curve of dimensional variation during cooling from composites curing temperature (180°C) is the key point for the manufacturing of composite parts with a perfect dimensional accuracy in the order of 0.1 millimetre. Additionally, its good weldability and mechinability allow for low cost manufacturing and ensure the long lifespan of the INVAR moulds.

Manufacturing Entity
Trademark
Family
Properties
Standards
Forms
Chemical composition
Pdf
Imphy

IMPHY N42

Controlled Expansion AlloysSealing with glassF30 1.3917 K94630PlatesFe Ni 42
Imphy

INVAR

Controlled Expansion AlloysVery low expansion coefficient1.3912, K93600  K93603PlatesFe Ni 36
Imphy

IMPHY DILVER

Controlled Expansion AlloysSealing with glassF15 1.3981 PlatesFe Ni 29 Co 17
Subscribe to Aerospace